Echelon SmartServer 2.2 - Manual (Page 321)

322 Using the SmartServer as Network Management Tool
hold down CTRL and click all other devices to be decommissioned or hold down SHIFT and
select another device to decommission the entire range of devices. The Setup - LON Device
Driver Web page opens.
3. Right-click a selected device, point to Manage, and click Decommission.
Alternatively, you can change the Commission Status property to Uncommissioned in the
Setup - LON Device Driver Web page, which appears when you select devices in step 2.
4. The SmartServer places the device in the soft-offline state (the device has an application loaded on
it and the device is configured, but the device application is offline) and then unconfigures the
devices. The offline device is highlighted red if it is located in the SmartServer tree; offline
devices in the OpenLNS tree are not marked red.
5. To recommission an unconfigured device and place it back online, select one or more devices to
recommission, right-click a selected device, point to Manage, and then click Commission on the
shortcut menu. You then select the devices again, right-click a selected device, point to Manage,
and then click Set Online on the shortcut menu.
Alternatively, you can select the Smart Network Management check boxes for the Commission
Status and Application Status properties in the Setup - LON Device Driver Web page, and then
click Submit. You can also change the Commission Status property to Commissioned and
change the Application Status property to Application Running (Online), and then click
Submit.
Note: Changing the domain ID of the SmartServer causes all the devices on the network to be
recommissioned automatically and reconfigured to the new domain ID.