Echelon SmartServer 2.2 - Manual (Page 242)

SmartServer 2.2 User’s Guide 243
Note: You can select two or more channels and view all the devices on those channels in the same
Overview – Devices page; however, the SmartServer’s performance may be impacted by trying to
create large lists of objects.
3. The Overview – Devices Web page opens. For the L ON W ORKS channel on which the
SmartServer is attached, this Web page by default displays the SmartServer's internal application
device (i.LON App), local network interface used for polling external data points and testing
external devices (iLON NI), LonTalk device (LtaLdv), and remote network interface (RNI), if
being used.
4. You can sort the objects listed by clicking a property header.
5. View and /or configure the following properties:
Icon/Status Displays the icon used to represent the device in the SmartServer or
OpenLNS tree and in the application frame. If the device is
uncommissioned, offline, or not synchronized with the OpenLNS
network database, this box is highlighted orange, red, or yellow,
respectively.
Subnet Displays the channel (subnet) on which the device is attached. The
Node property uniquely identifies the device on the subnet.
The subnet/node IDs begin with an address of 1/1 and increase
sequentially to 1/2, 1/3, and so on for devices on the same channel