Echelon SmartServer 2.2 - Manual (Page 542)

SmartServer 2.2 User’s Guide 543
4. Copy the following folders and files in the LonWorks\iLon100\images\iLon100 4.<xx> folder on
your computer to the root directory of the SmartServer flash disk: lonWorks, modules, web, and
iLonSystem.
Note: Do not copy the config folder or the WebParams.dat file in the
LonWorks\iLon100\images\iLon100 4.<xx> directory to your SmartServer. This prevents the
following:

Deletion of network configuration data if you did not change the name of the network from
the default Net.

Duplication of network configuration data if you are running the SmartServer in Standalone
mode.

Overwriting the /config/systemhealth.conf file, which determines how the SmartServer’s
system health is monitored.

Overwriting the /config/software/lspa.xml file, which contains the current LonScanner
Protocol Analyzer settings that you may have specified in the Setup – Security Web page.

Overwriting any pre-defined type translator rule XML files in the
/config/software/translatorRules folder that you may have modified

Overwriting any pre-defined template XML files in the /config/template folder that you may
have modified.

Overwriting any Web page restrictions you may have created with the i.LON Web Server
Security and Parameters program.
5. Copy the startup.scr file in the LonWorks\iLon100\images\iLon100 4.<xx>\config folder on
your computer to the /config directory of the SmartServer flash disk.