Echelon SmartServer 2.2 - Manual (Page 74)

SmartServer 2.2 User’s Guide 75
4. Optionally, select the Use Connection Timeout option and enter the maximum period of time (in
seconds) that the e-mail (SMTP) server waits for a response to a SOAP request from the local
SmartServer’s Web server before the transaction is canceled and a timeout error is thrown. By
default, the connection timeout is 2 seconds if this option is cleared. If you select this option, the
default timeout is 120 seconds.
5. Click Submit. The server icon in the tree is updated with the IP address or hostname you entered.
6. Right-click the new server icon, point to Add Service, then and click E-Mail (SMTP) on the
shortcut menu.
7. The Setup – Mail Web page opens.
8. Configure the following e-mail (SMTP) server properties:
Property
Name Enter a name for the SMTP server. This field is blank by default.