Echelon SmartServer 2.2 - Manual (Page 461)

462 Using Type Translators
5. Select the Type Translator functional block from the Static or Dynamic LonMark folder. The
folder available in the dialog depends on whether the SmartServer is using the static v12 interface
or the dynamic v40 interface.

If the SmartServer is using the static v12 interface (the default), expand the Static icon, select
the Type Translator functiona1 block, optionally enter a different name than the default
programmatic functional block name, and then click OK.

If you have activated the dynamic v40 interface on the SmartServer and you are managing the
network in Standalone mode, you can select the Type Translator functional block from either
the Static or the Dynamic folder. To select the Type Translator functional block from the
Dynamic folder, expand the Dynamic icon, expand the /lonworks/types folder, expand the
bas_controller folder, select the user-defined functional profile for the Type Translator
functional block, enter a name for the functional block such as “Type Translator 1”, and then
click OK.