Echelon SmartServer 2.2 - Manual (Page 259)

260 Using the SmartServer as Network Management Tool
General
(Configure - Data Point Web page) Driver
(Setup – LON Data Point Driver Web page)
Name Name, NV Index, Selector
Description Description
Icon Icon (read-only)
Hidden Hidden (read-only)
Alias Name Poll Rate
Persistent Direction
Use Default Value Static/Dynamic
Use Invalid Value Authentication
Format Description (read-only) Length
Unit String Format Description
Max Send Time (Heartbeat)
Min Send Time (Throttle)
Max Receive Time (Offline)
Use Send On Delta
Presets
Fields
Configuring Data Point General Properties
To configure the general properties of a data point, follow these steps:
1. Click General.
2. Select one or more data points to configure.

To configure one data point, click the data point. Alternatively, you can right-click the data
point and select Properties on the shortcut menu.

To configure two or more data points, click one data point and then either hold down CTRL
and click all other data points to be configured or hold down SHIFT and select another data
point to configure the entire range of data points. Alternatively, you can select multiple data
points, right-click one of the selected data points, and then click Properties on the shortcut
menu.
3. The Configure - Data Point Web page opens.