Echelon SmartServer 2.2 User Manual
Page 76
SmartServer
2.2 User’s Guide
77
2. The Setup – Host Web page opens, and a server icon is added one level below the LAN icon at
the bottom of the navigation pane or one level below the dial-out connection icon.
3. Enter the IP address or hostname of the time (SNTP) server.
4. Optionally, select the Use Connection Timeout option and enter the maximum period of time (in
seconds) that the time (SNTP) server waits for a response to a SOAP request from the local
SmartServer’s Web server before the transaction is canceled and a timeout error is thrown. By
default, the connection timeout is 2 seconds if this option is cleared. If you select this option, the
default timeout is 120 seconds.
5. Click Submit. The server icon in the tree is updated with the IP address or hostname you entered.
6. Right-click the server icon, point to Add Service, then and click Time (SNTP) on the shortcut
menu.
7. The Setup – TimeService Web page opens.