Echelon SmartServer 2.2 - Manual (Page 247)

248 Using the SmartServer as Network Management Tool
3. Right-click the L ON W ORKS channel to be attached to the near side of the router, and then select
Add Router on the shortcut menu.
4. The Add Router dialog opens:
Note: If the SmartServer does not have access to an OpenLNS network database (an OpenLNS
Server or LNS Server has not been added to the LAN, an OpenLNS Server and OpenLNS network
database have not been specified, or the SmartServer is operating in standalone mode), the Load
Network Settings? dialog opens when you attempt to create a router. Click OK to go to the
Setup – LON Network Driver Web page to enable the SmartServer to access an OpenLNS
network database. Click Cancel to stop the router creation process.