Echelon SmartServer 2.2 - Manual (Page 317)

318 Using the SmartServer as Network Management Tool
2. Click the Driver option at the top of the navigation pane on the left side of the SmartServer Web
interface.
3. Open the Overview – Devices Web page. To do this right-click a network or channel, point to
Overview, and then click Devices. This example replaces the DIO-1 device.
4. Click Scan to discover the replacement device.
5. When the replacement device is discovered (dio-10v3 in this example), its Neuron ID appears in
the Neuron ID box, and the under construction triangle appears to the right of the generic device
icon.
6. In the Replacement ID box of the replacement device, select the name of the original device to be
replaced.
7. The Replacement ID of the replacement device is updated with the name of the original device,
and the Replacement ID of the original device becomes unavailable.