Echelon SmartServer 2.2 - Manual (Page 403)

404 Scheduling
5. Select the Event Calendar functional block from the Static or Dynamic LonMark folder. The
folder available in the dialog depends on whether the SmartServer is using the default static v12
interface or the dynamic v40 interface.

If the SmartServer is using the static v12interface (the default), expand the Static icon, select
the Event Calendar functiona1 block, optionally enter a different name than the default
programmatic functional block name, and then click OK.

If you have activated the dynamic v40 interface on the SmartServer and you are managing the
network in Standalone mode, you can select the Scheduler functional block from either the
Static or the Dynamic folder. To select the Scheduler functional block from the Dynamic
folder, expand the Dynamic icon, expand the /lonworks/types folder, expand the
bas_controller folder, select the user-defined functional profile for the Event Calendar, enter
a name for the functional block such as “Calendar”, and then click OK.