Echelon SmartServer 2.2 - Manual (Page 30)

SmartServer 2.2 User’s Guide 31
14. Click Finish. If you need to reboot your computer, a window will appear prompting you to select
to reboot your computer now or later.
15. The SmartServer 2.2 ReadMe file appears. When you finish reading the SmartServer 2.2 ReadMe,
close the window.
16. If you chose to display the default IPv6 link local address (you can open this dialog by clicking
Start, pointing to Programs, pointing to Echelon SmartServer 2.2 Software, and then clicking
SmartServer 2.2 Default IPv6 Address.), enter the MAC ID address of your SmartServer in the
MAC ID box (the MAC ID is located on the bottom of your SmartServer hardware device), and
then click Display Address to show the default IPv6 address.
17. To use this IPv6 address to access your SmartServer you need to enable IPv6 on your SmartServer
as described in Configuring TCP/IP Properties in Chapter 3.
Installing Echelon SmartServer 2.2 Enterprise Services
The Echelon Enterprise Services 2.2 (EES 2.2) includes the i.LON Admin Server used for managing
and deploying SmartServers, and the LNS Proxy Web service and Tomcat 6 Server used for
communication between the SmartServer and OpenLNS or LNS network databases. You need to
install EES 2.2 in order to synchronize the SmartServer to an OpenLNS or LNS network database, and
add the data points of external devices in OpenLNS or LNS managed networks to the SmartServer’s
built-in applications.