Echelon SmartServer 2.2 - Manual (Page 203)

204 Using the SmartServer as Network Management Tool
To delete a OpenLNS network database in the OpenLNS tree, right-click the OpenLNS network
database to be deleted, click Delete on the shortcut menu, click OK in the dialog that opens to confirm
the deletion of the OpenLNS network database, and then click Submit. The OpenLNS network
database is permanently removed from the OpenLNS Server and it is no longer available.
Configuring a L ON W ORKS Network
You can use the Driver properties to change the network management service, change the network
management mode, select an OpenLNS network database to which the devices on the target
SmartServer are synchronized, and modify the domain ID or length of the network. To configure the
L
ON W ORKS network driver properties, follow these steps:
1. Click a network icon or an OpenLNS network database icon in the SmartServer tree or the
OpenLNS tree.
2. Click Driver. The Setup – LON Network Driver Web page opens.
3. Configure the following network driver properties:
Name Displays the name of the network. This field is read-only.
Handle Displays the handle of the network assigned by the OpenLNS Server.
This field is read-only.
Description Enter an optional description of the network. This description has no
effect on network operation, but you can use it to provide additional
documentation for as-built reports.
Lon Network
Property
Icon Displays the icon used to represent the network in the SmartServer or
OpenLNS tree and in the application frame. You can change the icon for
the network in the SmartServer tree by selecting a different icon and then
clicking Submit.
You cannot change the icon used for networks in the OpenLNS tree.
Hidden Hides the network in the SmartServer tree or OpenLNS tree and in the
application frame. If this network is not actively being used, you can hide
it to simplify the web interface.
To show a hidden network icon, click Settings. In the Global Settings
dialog, select the Networks check box in the Display Hidden property
and then click Close.