Creating l, Orks, Networks from the smartserver tree – Echelon SmartServer 2.2 User Manual
Page 199
200
Using the SmartServer as Network Management Tool
Creating L
ON
W
ORKS
Networks from the SmartServer Tree
To create a new L
ON
W
ORKS
network from the SmartServer tree, follow these steps:
1. Verify that EES 2.2 and OpenLNS Server have been installed on your computer. See Chapter 1 of
the Echelon Enterprise Services 2.2 User’s Guide for how to perform these installations.
2. Verify that an OpenLNS Server has been added to the LAN in order to setup the LNS Proxy Web
service on your SmartServer. See Adding an OpenLNS Server to the LAN in Chapter 3 for how to
add an OpenLNS Server to the LAN and setup the LNS Proxy Web service on your SmartServer.
3. Click Driver and then click the network icon. The Setup – LON Network Driver Web page
opens.
4. Verify that the Network Management Service property is set to LNS Auto or LNS Manual.
5. In the LNS Server property, select the OpenLNS Server on the LAN in which the OpenLNS
network database is to be stored, if that OpenLNS Server is not already specified.
6. If the SmartServer is not currently synchronized to an OpenLNS network database, proceed with
the following steps; otherwise, skip to step 8.
a. The LNS Network dialog opens.