Echelon SmartServer 2.2 - Manual (Page 241)

242 Using the SmartServer as Network Management Tool
Viewing L
ON
W
ORKS
Devices
You can view and configure the all the L ON W ORKS devices in your network or on a specific channel
using the Overview – Devices Web page. This Web page displays the statuses, subnet/node IDs,
names, and Neuron IDs of the devices. You can also use this Web page to discover uncommissioned
devices on the network, replace devices, and wink and test devices.

In General mode, the Overview – Devices Web page displays the status, name, and parent
channel for each device.

In Driver mode, the Overview – Devices Web page displays the status, subnet/node ID, channel,
name, Neuron ID, template (XIF or XML file), and location of each device, and you can use this
Web page to re-name, upgrade, update the location string, wink, or test any device. In addition,
you can use this Web page to install new devices that have been added to the network using the
SmartServer’s new device discovery feature, and you can replace devices that have failed using
the new automatic device replacement feature.
To use the Overview – Devices Web page to view L ON W ORKS devices, follow these steps:
1. To configure, install, replace, or test devices, click the Driver option at the top of the navigation
pane on the left side of the SmartServer Web interface.
2. Right-click a L ON W ORKS network or channel in the SmartServer tree or OpenLNS tree, point to
Overview, and then select Devices.