Echelon SmartServer 2.2 - Manual (Page 12)

SmartServer User’s Guide xiii

Terminal emulator such as PuTTY.
SmartServer 2.2 Upgrade Requirements
You must have a SmartServer 2.0 license for each SmartServer 1.0 (a SmartServer running the Release
4, 4.01, or 4.02 firmware) or i.LON e3 plus Server to be upgraded to SmartServer 2.2 (a SmartServer
running the Release 4.06 firmware). Upgrades from earlier i.LON releases are not supported due to
their smaller memory not being sufficient for the SmartServer firmware.
You can use the i.LON AdminServer Web application included with Echelon Enterprise Services 2.2
to automatically upgrade your licensed SmartServers. For more information on using the i.LON
AdminServer to upgrade your SmartServers, see Chapter 2 of the Echelon Enterprise Services 2.2
User’s Guide.
Note: To upgrade i.LON e3 plus Servers or SmartServers that have previously been downgraded to
the i.LON 100 e3 version firmware to the SmartServer 2.2 (Release 4.06) firmware, you must first
manually upgrade them to the SmartServer 1.0 (Release 4.02) firmware via FTP as described in
Chapter 3 of this guide.
SmartServer Documentation
The documentation for the SmartServer is provided as Adobe Acrobat PDF files and online help files.
You can download the latest SmartServer documentation, including the latest version of this guide,
from Echelon’s Website at
www.echelon.com/support/documentation/manuals/cis .
This user’s guide, the online help files, and the following documents comprise the SmartServer
documentation suite:
 Echelon Enterprise Services 2.2 User’s Guide. Describes how to use the i.LON AdminServer to
rapidly and automatically deploy and install L
ON W ORKS networks and how to use the LNS Proxy
Web service to manage OpenLNS networks.

SmartServer 2.2 Hardware Guide. Describes how to assemble, mount, and wire the SmartServer
hardware.

SmartServer 2.2 Power Line Repeating Network Management Guide. Describes how to install a
PL-20 repeating network and how to use the SmartServer to prepare, maintain, monitor and
control, and connect the network.
 SmartServer 2.2 Programmer’s Reference. Describes how to configure the SmartServer using
XML files and SOAP calls. This allows you to create your own applications that you can use to
configure the SmartServer.

SmartServer 2.0 Programming Tools User’s Guide. Describes how to write custom built-in
applications called Freely Programmable Modules (FPMs) and deploy them on the SmartServer.
FPMs let you implement custom functionality and tailor the SmartServer to meet your needs.

SmartServer 2.2 Quick Start Guide. Contains all the information you will need to connect the
SmartServer hardware, install the SmartServer software, and configure the SmartServer using the
SmartServer configuration Web pages.

i.LON Vision 2.2 User’s Guide. Describes how to create custom Web pages for monitoring and
controlling L
ON W ORKS networks and other control networks.

IP-852 Channel User’s Guide. Describes how to configure an IP-852 channel with the Echelon
L ON W ORKS
®
/IP IP-852 Configuration Server. You will need this information if you plan to use
the SmartServer as an IP-852 router.

Rapid Deployment Example for EES. Describes how to assemble and install a demo board that
you can use to test the new automatic network installation feature.