Echelon SmartServer 2.2 - Manual (Page 305)

306 Using the SmartServer as Network Management Tool

To use the scanning method, scan the Neuron ID bar code label on the device using a
hands-free cordless scanner or a handheld gun-style laser, gun-style LED, and pen-style
scanner to scan the bar code and then proceed to step 9.
5. If you are using the service pin method, the LON Device Identification dialog opens.
6. Optionally, you can select Show Messages with Identical Program ID Only to limit service pin
messages to those devices that have the same program ID.
7. Press the service pin of the device. The Neuron ID and program ID of the device being installed
are both entered into the Incoming Service Pin Messages box, and they are input into the Neuron
ID or LUID and Program ID boxes, respectively. You can manually enter the device’s Neuron
ID in the Neuron ID or LUID box.
Note: If you are acquiring the Neuron ID of the SmartServer [the i.LON App (Internal) device],
the SmartServer’s IP-852 router [the Router (Internal) device], or the SmartServer’s network
interface [the i.LON NI (Internal) device] in the OpenLNS tree and Show Messages with
Identical Program ID Only is cleared, you will receive service pin messages from all three of
these internal SmartServer devices. You can ignore the extra service pin messages because the