Echelon SmartServer 2.2 - Manual (Page 162)

SmartServer 2.2 User’s Guide 163
5. In the Name property, enter a meaningful name for the template.
6. In the Select Path or File property, expand the Templates folder to show all the folders in the
/config/template directory on the SmartServer flash disk or your computer. For device templates
in the OpenLNS tree, the root directory refers to the
LonWorks\iLON\EnterpriseServices\repository\ees-lnsproxy folder on your EES 2.2
computer. Select the folder to which the template is to be saved or expand the folder and select an
existing template file to be overwritten.
You can also select a folder and then enter a sub-directory. For example, if you are creating a
template for a L
ON W ORKS lamp device in the SmartServer tree, you can select the
/config/template/lonworks directory and then enter Lamp/ in the Name property to save the
lamp template to its own /config/template/lonworks/Lamp sub-directory. The Name property
will be updated with the specified full path of the template.
7. To enable devices created from the device template to be installed automatically clear Clear from
Template in the Network Management property. This saves any network management
commands currently issued for the source device (for example, commission, set online, reset, and
so on) in the device template. These network management commands are executed when new