Echelon SmartServer 2.2 - Manual (Page 111)

112 Configuring and Managing the SmartServer
Upgrading an i.LON e3 plus Internet Server to the SmartServer
You can upgrade an i.LON 100 e3 plus Server to the SmartServer 2.2 firmware so that you can
implement the new features provided by SmartServer 2.2. This upgrade entails manually upgrading
the firmware on your i.LON 100 e3 plus Server to the SmartServer 1.0 software, which preserves the
configurations of the built-in applications and NVEs on your i.LON 100 e3 plus Server, and then using
the i.LON AdminServer to automatically upgrade to the SmartServer 2.2 firmware.
To perform the upgrade, follow these steps:
1. Install the SmartServer 2.2 software from the SmartServer 2.2 DVD as described in Installing
Echelon SmartServer 2.2 Software in Chapter 2. This installs the latest SmartServer 1.0 and
SmartServer 2.2 images to the LonWorks\iLon100\images folder on your computer.
2. Install EES 2.2 from the SmartServer 2.2 DVD. Also install OpenLNS Server if you plan on
using the SmartServer 2.2 in an OpenLNS managed network. See Installing Echelon SmartServer
2.2 Enterprise Services and Installing Echelon OpenLNS Server in Chapter 2 for how to perform
these installations.
3. Backup the i.LON 100 e3 plus Server via FTP. To do this follow these steps:
a. Verify that you have the correct user name and password to access your i.LON 100 e3 Server
via FTP and that FTP access is enabled on your i.LON e3 Server. To do this, follow these
steps:
i. Click Setup and then click Security. The Setup – Security Web page opens.
ii. Under Property, verify that the FTP/Telnet User Name and FTP/Telnet Password
properties are correct.
iii. Under Service, verify that the Enable FTP check box is selected.
b. In the browser of an FTP client such as Core FPT, WS FTP Pro, and Cute FTP, enter the FTP
URL of your i.LON 100 e3 Server (ftp://192.168.1.222, for example).
c. Enter the FTP/Telnet user name and password for accessing your i.LON 100 e3 Server via
FTP.
d. Copy all the folders in the root directory of the i.LON 100 e3 Server flash disk except for the
alarmLog and data folders to the local drive of your computer, a USB drive, another
removable media, or a shared network drive with read/write permissions. If you copy Data
Logger and Alarm Notifier log files to the SmartServer flash disk, the SmartServer will
replace them with empty files.