Echelon SmartServer 2.2 - Manual (Page 119)

120 Configuring and Managing the SmartServer
3. Click Cleanup to proceed with the resetting of the SmartServer to its factory default settings.
To restore your SmartServer to its factory default settings with the console application, enter the
factorydefaults command, or enter the factorydefaults keepipaddrs command to
reset the SmartServer but keep its basic IPv4 and IPv6 IP addresses.
Performing a factory default reset, resets your SmartServer to the following configuration:
FTP/Telnet User Name ilon
FTP/Telnet Password ilon
Automatically Obtain IP address False
IPv4 Address 192.168.1.222
IPv4 Subnet Mask 255.255.255.0
IPv4 Gateway 192.168.1.222
IPv6 Link Local Address fe80::2d0:71ff:fe02:a18
IPv6 Global Address different if SmartServer is placed on a new TCP/IP network
Web Server Port 80
Hostname SmartServer
Domain Suffix [blank]
DNS Servers 0.0.0.0
Time (SNTP) Servers 0.0.0.0
Time Zone (GMT-08:00) Pacific Time (US & Canada); Tijuana
Network Management Service LNS Auto (No Host)