Echelon SmartServer 2.2 - Manual (Page 133)

134 Using the SmartServer Web Interface
If you click Driver, the Setup – LON Data Point Driver Web page will open for that data point. You
can use this Web page to view or configure the following properties for that L
ON W ORKS DATA point:
poll rate, direction, whether it is static or dynamic, length, and format description (program ID, data
type, and format).
Now if you click a Modbus data point with Driver mode selected, the Setup – Modbus Data Point
Driver Web page open for that data point. You can use this Web page to view or configure the
following properties for that Modbus data point: poll rate, direction, register type, data access type,
whether the data point is read-write or read-only, addressing properties, and data type/formatting
properties.