Echelon SmartServer 2.2 - Manual (Page 201)

202 Using the SmartServer as Network Management Tool
b. Click Submit. A dialog appears prompting you to confirm the creation of the new OpenLNS
network database on the OpenLNS Server.
c. Click OK. After the dialog closes, click Submit.
d. The name of the network changes to the name specified in step a.
8. If the Network Management Service property is set to LNS Auto, the SmartServer automatically
begins synchronization with the new OpenLNS network database. If the Network Management
Service property is set to LNS Manual, manually synchronize the SmartServer to the new
OpenLNS network database following the steps described in Manually Synchronizing the
SmartServer to an OpenLNS network database later in this chapter.
Creating L ON W ORKS Networks from the OpenLNS Tree
To create a new L ON W ORKS network from the OpenLNS tree, follow these steps:
1. Verify that EES 2.2 and OpenLNS Server have been installed on your computer. See Chapter 1 of
the Echelon Enterprise Services 2.2 User’s Guide for how to perform these installations.
2. Verify that an OpenLNS Server has been added to the LAN in order to setup the LNS Proxy Web
service on your SmartServer. See Adding an OpenLNS Server to the LAN in Chapter 3 for how to
add an OpenLNS Server to the LAN and setup the LNS Proxy Web service on your SmartServer.
3. Right-click the LNS Server icon and then click Create Network on the shortcut menu.
4. The Create Network dialog opens.