Echelon SmartServer 2.2 - Manual (Page 289)

290 Using the SmartServer as Network Management Tool
3. Enter the following device properties:
Name Enter a name for the M-Bus device that is unique to the network.
File Name Displays the full path of the template (.XML file) selected for the M-Bus
device.
Select Select the device interface for the M-Bus device from the Template
folder. To do this, expand the Template directory to show the any
user-created templates in the config/template folder on the SmartServer.
The user-created device templates include all the data points shown on the
navigation pane at the time the M-Bus device template was created. See
Using Device Templates in Chapter 4 for more information on creating
Device Templates.
4. Click OK. The M-Bus device and a Virtual Functional Block containing all of the device’s static
data points are added to the bottom of the tree of the parent M-Bus channel.
5. Click Submit.
Configuring M-Bus Devices
You can use the driver properties to configure M-Bus devices. To configure the device properties,
follow these steps:
1. Click Driver.
2. Select one or more M-Bus devices to be configured.
3. The Setup - M-Bus Device Driver Web page opens.