Brocade Multi-Service IronWare Switching Configuration Guide (Supporting R05.6.00) - Manual (Page 949)

Multi-Service IronWare Switching Configuration Guide 919
53-1003036-02
Displaying BFD information
25
Diag Value of the “diagnostic” field in the BFD Control Message as used by
the local device in the last message sent.
Demand Value of the “demand” bit in the BFD Control Message as used by the
local device in the last message sent.
Poll Value of the “poll” bit in the BFD Control Message as used by the local
device in the last message sent.
MinTxInterval The interval in microseconds between which the device will send a BFD
message from this local neighbor port to its peer.
MinRxInterval The interval in microseconds that the neighbor device waits to receive a
BFD message from its peer on this local port.
Multiplier The number of times that the neighbor device will wait for the
MinRxInterval time on this port before it determines that its peer device
is non-operational.
Remote:
Disc Value of the “local discriminator” field in the BFD Control Message as
received in the last message sent by the remote peer.
Diag Value of the “diagnostic” field in the BFD Control Message as received in
the last message sent by the remote peer.
Demand Value of the “demand” bit in the BFD Control Message as received in the
last message sent by the remote peer.
Poll Value of the “poll” bit in the BFD Control Message as received in the last
message sent by the remote peer.
MinTxInterval The interval in milliseconds between which the device will send a BFD
message from the remote neighbor port to its peer.
MinRxInterval The interval in milliseconds that the neighbor device waits to receive a
BFD message from its peer on this remote port.
Multiplier The number of times that the remote neighbor device will wait for the
MinRxInterval time on this port before it determines that its peer device
is non-operational.
Stats: Rx Total number of BFD control messages received from the remote peer.
Stats: Tx Total number of BFD control messages sent to the remote peer.
Stats: SessionUpCount The number of times the session has transitioned to the UP state.
Stats: SysUpTime The amount of time that the system has been up.
Session Uptime The amount of time the session has been in the UP state.
LastSessionDownTimestamp The system time at which the session last transitioned from the UP state
to some other state.
Physical Port The physical port on which the peer is known.
Vlan Id The VLAN ID of the VLAN that the physical port is resident on.
Session
Using PBIF Assist Y - PBIF Assist is used for this BFD session
N- PBIF is not used for this BFD session.
TABLE 126 Display of BFD neighbor detail information (Continued)
This field... Displays...