Brocade Multi-Service IronWare Switching Configuration Guide (Supporting R05.6.00) - Manual (Page 714)

684 Multi-Service IronWare Switching Configuration Guide
53-1003036-02
MCT for VLL
18
Extended Counters: Disabled
Counter : Disabled
Vll-Peer : 5.5.5.5 (Standby-Standby)
State : Down - no tummel LSP to vll-peer
Remote VC type : Remote VC MTU :
Local label : Remote label :
Local group-id : 0 Remote group-id:
Tunnel LSP : LSP_to_1 (tnl0)
MCT Status TLV : Standby
Vll-Peer : 4.4.4.4 (Active-Active)
State : UP
Remote VC type : tag Remote VC MTU : 1500
Local label : 798720 Remote label : 798722
Local group-id : 0 Remote group-id: 0
Tunnel LSP : LSP4 (tnl2)
MCT Status TLV : Active
MCT Infomation :
Local CCEP state : UP
Remote CCEP state : Down
Pending reversion time: --
Spoke PW : 1.1.1.1
State : DOwn - endpoint is not UP (Reason: Election not done)
Remote VC type : Remote VC MTU :
Local label : Remote label :
Local group-id : Remote group-id: 0
Tunnel LSP : LSP_to_5 (tnl2)
MCT Peer PWs :
VLL Peer UP/DOWN Active/Standby
-------- ------- --------------
1.1.1.1 UP Active-Standby
10.10.10.10 UP Active-Active
Syntax: show mpls vll detail
MCT VLL sample configuration
Brocade# show running configuration
router mpls
l2vpn-revertible-timer 300
lsp MCT_PEER_LSP/
to 2.2.2.2
enable
vll MCT_VLL1 101
vll-peer 3.3.3.3 [4.4.4.4]
[vll-pw-redundancy-active]
vlan 101
tagged eth 1/1
cluster mct_l2vpn 1
rbridge-id 1
l2vpn-peer 2.2.2.2 rbridge-id 2
deploy