Brocade Multi-Service IronWare Switching Configuration Guide (Supporting R05.6.00) - Manual (Page 250)

220 Multi-Service IronWare Switching Configuration Guide
53-1003036-02
show vlan tvf-lag-lb
7
show vlan tvf-lag-lb
Displays transparent VLAN flooding LAG load balancing information.
Syntax show vlan tvf-lag-lb
Parameters None
Command
Modes
Privileged EXEC mode
Usage
Guidelines
The show vlan tvf-lag-lb command displays transparent VLAN flooding LAG load balancing
information.
Command
Output
The show vlan tvf-lag-lb command displays the following information:
Examples The following example displays transparent VLAN flooding LAG load balancing information:
Brocade#show vlan tvf-lag-lb
**** TVF LAG Load Balancing ****
TVF LAG Load Balancing is enabled!
TVF FID pool size: 2048, Max FID groups: 512, FID group size: 4
TVF LAG Load balancing groups:
VLAN: 100, group ID: 257, FID base: 0x9800, FID count: 4
VLAN: 200, group ID: 258, FID base: 0x9804, FID count: 4
2 TVF LAG Load balancing groups are configured
History
Related
Commands
show vlan
Output field Description
TVF FID pool size Specifies the maximum TVF FID pool size.
Max FID groups Specifies the maximum TVF FID groups added.
FID group size Specifies the maximum TVF FID group size.
VLAN Specifies the VLAN ID.
group ID Specifies the group ID of the load balancing group.
FID base Specifies the Forwarding ID base value.
FID count Specifies the Forwarding ID count value.
Release Command History
Multi-Service IronWare
R05.6 This command was introduced.