Brocade Multi-Service IronWare Switching Configuration Guide (Supporting R05.6.00) - Manual (Page 188)

158 Multi-Service IronWare Switching Configuration Guide
53-1003036-02
Deploying a LAG
6
Deployment: Trunk ID 6, Active Primary 31/12, base fid: 0x0800
Port Link Port-State Speed Tag MAC Name
31/11 Up Forward 1G No 00da.1111.27aa test
31/12 Up Forward 1G No 00da.1111.27aa
31/13 Up Forward 1G No 00da.1111.27aa
31/14 Up Forward 1G No 00da.1111.27aa
31/21 Up Forward 1G No 00da.1111.27aa
31/22 Up Forward 1G No 00da.1111.27aa
31/23 Up Forward 1G No 00da.1111.27aa
31/24 Up Forward 1G No 00da.1111.27aa
Syntax: [no] set-lag-port-mode-wid
Displaying LAG statistics
You can display LAG statistics in either full or brief mode. Full mode is the default and is displayed
when the show statistics lag command is executed without the brief option. These examples show
both options of the show statistics lag command.
Brocade# show statistics brief lag
LAG Packets Collisions Errors
[Receive Transmit] [Recv Txmit] [InErr
OutErr]
LAG d1 1173 1018 0 0 0 0
LAG e 1268 1277 0 0 0 0
Brocade# show statistics lag
LAG d1 Counters:
InOctets 127986 OutOctets 107753
InPkts 1149 OutPkts 996
InBroadcastPkts 0 OutBroadcastPkts 0
InMulticastPkts 852 OutMulticastPkts 684
InUnicastPkts 297 OutUnicastPkts 312
InDiscards 0 OutDiscards 0
InErrors 0 OutErrors 0
InCollisions 0 OutCollisions 0
OutLateCollisions 0
Alignment 0 FCS 0
GiantPkts 0 ShortPkts 0
InBitsPerSec 0 OutBitsPerSec 0
InPktsPerSec 0 OutPktsPerSec 0
InUtilization 0.0% OutUtilization 0.0%
Syntax: show statistics [brief] lag [lag-name]
The following syntax options can be used for a brief display:
Syntax: show statistics brief lag
Syntax: show statistics brief lag lag name
The following syntax options can be used for a full display:
Syntax: show statistics lag
Syntax: show statistics lag lag name