beautypg.com

Displaying vlan group information – Brocade Multi-Service IronWare Switching Configuration Guide (Supporting R05.6.00) User Manual

Page 241

background image

Multi-Service IronWare Switching Configuration Guide

211

53-1003036-02

Displaying VLAN information

7

Displaying VLAN group information

To display information about VLAN groups, enter the following command.

Brocade# show vlan-group 10

Configured VLAN-Group entries : 1

Maximum VLAN-Group entries : 32

VLAN-GROUP 10

Number of VLANs: 4

VLANs: 10 to 13

Tagged ports: ethernet 3/1

Syntax: show vlan-group [vlan-group-id] [ begin expression | exclude expression | include

expression]

The output shows the following information.

Protocol

Protocol configured on the VLAN.

State

Current state of the port such as disabled, blocking, forwarding, etc.

TABLE 39

Output of show vlan Ethernet

This field...

Displays...

Configured VLAN-Group entries

Number of VLAN groups that have been configured on the device.

Maximum VLAN-Group entries

Maximum number of VLAN groups that can be configured on the device.

VLAN-Group #

ID of the VLAN group

VLANs

VLANs that belong to the VLAN group.

Tagged ports:

Type and ID of the tagged ports that are members of the VLAN group

TABLE 38

Output of show vlan detail (Continued)

This field...

Displays...