Brocade Multi-Service IronWare Switching Configuration Guide (Supporting R05.6.00) - Manual (Page 539)

Multi-Service IronWare Switching Configuration Guide 509
53-1003036-02
Configuring MRP under an ESI VLAN
14
Commands on Switch C
Brocade(config)# vlan 2
Brocade(config-vlan-2)# tag ethernet 1/1 to 1/2
Brocade(config-vlan-2)# metro-ring 1
Brocade(config-vlan-2-mrp-1)# name “Metro A”
Brocade(config-vlan-2-mrp-1)# ring-interface ethernet 1/1 ethernet 1/2
Brocade(config-vlan-2-mrp-1)# enable
Brocade(config-vlan-2)# exit
Brocade(config)# vlan 30
Brocade(config-vlan-30)# tag ethernet 1/1 to 1/2
Brocade(config-vlan-30)# tag ethernet 2/1
Brocade(config-vlan-30)# exit
Brocade(config)# vlan 40
Brocade(config-vlan-40)# tag ethernet 1/1 to 1/2
Brocade(config-vlan-40)# tag ethernet 4/1
Brocade(config-vlan-40)# exit
Brocade(config)# topology-group 1
Brocade(config-topo-group-1)# master-vlan 2
Brocade(config-topo-group-1)# member-vlan 30
Brocade(config-topo-group-1)# member-vlan 40
Commands on Switch D
Brocade(config)# vlan 2
Brocade(config-vlan-2)# tag ethernet 1/1 to 1/2
Brocade(config-vlan-2)# metro-ring 1
Brocade(config-vlan-2-mrp-1)# name “Metro A”
Brocade(config-vlan-2-mrp-1)# ring-interface ethernet 1/1 ethernet 1/2
Brocade(config-vlan-2-mrp-1)# enable
Brocade(config-vlan-2)# exit
Brocade(config)# vlan 30
Brocade(config-vlan-30)# tag ethernet 1/1 to 1/2
Brocade(config-vlan-30)# tag ethernet 2/1
Brocade(config-vlan-30)# exit
Brocade(config)# vlan 40
Brocade(config-vlan-40)# tag ethernet 1/1 to 1/2
Brocade(config-vlan-40)# tag ethernet 4/1
Brocade(config-vlan-40)# exit
Brocade(config)# topology-group 1
Brocade(config-topo-group-1)# master-vlan 2
Brocade(config-topo-group-1)# member-vlan 30
Brocade(config-topo-group-1)# member-vlan 40
Configuring MRP under an ESI VLAN
MRP can also be configured under a vlan that is part of a user-configured ESI. Configuring MRP in
this scenario is exactly the same as explained before.
Brocade(config)# esi customer1 encapsulation cvlan
Brocade(config-esi-customer1)# vlan 100
Brocade(config-esi-customer1-vlan-100)# tag ethernet 1/1 to 1/2
Brocade(config-esi-customer1-vlan-100)# metro-ring 1
Brocade(config-esi-customer1-vlan-100-mrp-1)# name "Metro A"
Brocade(config-esi-customer1-vlan-100-mrp-1)# master
Brocade(config-esi-customer1-vlan-100-mrp-1)# ring-interface ethernet 1/1