beautypg.com

Displaying gre tunnel information, Displaying gre and manual ipv6 tunnel statistics – Brocade Multi-Service IronWare Switching Configuration Guide (Supporting R05.6.00) User Manual

Page 879

background image

Multi-Service IronWare Switching Configuration Guide

849

53-1003036-02

Displaying IP information

19

Displaying GRE tunnel information

To display information about all GRE tunnels configured on a device, enter the following command.

Syntax: show gre tunnel-number

The tunnel-number option allows you to limit the display to information about a specified tunnel.

Displaying GRE and manual IPv6 tunnel statistics

This section contains examples of the following show commands for GRE tunnel and manual IPv6
tunnel statistics:

show ip-tunnels

show ip-tunnel tunnel ID

show statistics brief tunnel tunnel ID

show statistics tunnel tunnel ID

show interface tunnel tunnel ID

To see a list of the configured tunnels with some details of each tunnel, use the show ip-tunnels
command as the following example illustrates. This example shows that one tunnel exists; it has IP
tunnel statistics collection enabled; and neither GRE nor IPv6 session enforce are enabled.

Syntax: show ip tunnel number

Syntax: show ip tunnels

The output of this command contains the following type of information:

passive resets

The number of TCP connections this device reset because the device at the other
end of the connection sent a TCP RESET message.

input errors

This information is used by Brocade customer support.

in segments

The number of TCP segments received by the device.

out segments

The number of TCP segments sent by the device.

retransmission

The number of segments that this device retransmitted because the retransmission
timer for the segment had expired before the device at the other end of the
connection had acknowledged receipt of the segment.

TABLE 108

CLI display of IP traffic statistics (Continued)

This field...

Displays...

Brocade# show gre

Total Valid GRE Tunnels : 1, GRE Session Check Enforce: FALSE

GRE tnnl 1 UP : src_ip 10.25.25.4, dst_ip 10.15.15.3

TTL 255, TOS 0, NHT 0, MTU 1476

Brocade#show ip-tunnels

# of Valid Tunnels: 1, GRE Session Enforce: FALSE, IPv6 Session Enforce: FALSE

IP Tunnel Statistics collection Enabled

GRE tnnl 1 UP src_ip 10.1.1.4, dst_ip 10.1.1.1

TTL 255, TOS 0, NHT 0, MTU 1476