Brocade Multi-Service IronWare Switching Configuration Guide (Supporting R05.6.00) - Manual (Page 217)

Multi-Service IronWare Switching Configuration Guide 187
53-1003036-02
Configuring 802.1q tag-type translation
7
Example configuration
Figure 15 shows an example 802.1Q-in-Q configuration.
FIGURE 15 Example 802.1Q-in-Q configuration
Configuring 802.1q tag-type translation
The introduction of 802.1q tag-type translation provides finer granularity for configuring multiple
802.1q tag-types on a single device, by enabling you to configure 802.1q tag-type per port. This
enhancement allows for tag-type translation from one port to the next on tagged interfaces.
802.1Q tag-type translation enables you to configure a separate 802.1q tag-type per port, allowing
for tag-type translation from one port to the next on tagged interfaces.
Figure 16 shows a basic example application of the 802.1q tag-type translation feature.