Brocade Multi-Service IronWare Switching Configuration Guide (Supporting R05.6.00) User Manual

Page 136

106

Multi-Service IronWare Switching Configuration Guide

53-1003036-02

Using LLDP

A backslash (\) at the end of a line indicates that the text continues on the next line.

Except for the Neighbor field, the fields in the above output are described in the individual TLV
advertisement sections in this chapter.

Syntax: show lldp neighbors detail [ports ethernet slotnum/portnum | all]

If you do not specify any ports or use the keyword all, by default, the report will show the LLDP
neighbor details for all ports.

You can list all of the ports individually, use the keyword to to specify ranges of ports, or a
combination of both. To apply the configuration to all ports on the device, use the keyword all
instead of listing the ports individually.

This field...

Displays...

Neighbor

The source MAC address from which the packet was received, and the remaining TTL for the
neighbor entry.

Brocade#show lldp neighbors detail ports e 8/13

Local port: 8/13

+ Chassis ID (MAC address): 0024.3891.1100

+ Port ID (MAC address): 0024.3891.125c

+ Time to live: 40 seconds

+ System name : "IxANVL-1"

+ Port description : "GigabitEthernet8/13"

+ System description : "Brocade MLXe (System Mode: MLX), IronWare Version V\

5.3.0T163 Compiled on Jan 3 2012 at 18:01:00 label\

ed as V5.3.00b460"

+ System capabilities : bridge, router

Enabled capabilities: bridge, router

+ 802.3 MAC/PHY : auto-negotiation enabled

Advertised capabilities: 10BaseT-HD, 10BaseT-FD, 100BaseTX-HD,

100BaseTX-FD, 1000BaseT-HD, 1000BaseT-FD

Operational MAU type : 1000BaseT-FD

+ Link aggregation: not capable

+ Maximum frame size: 9216 octets

+ Port VLAN ID: 813

+ Management address (IPv4): 10.1.1.190

+ Management address (IPv4): 10.20.103.190

+ Management address (IPv6): 2001:DB8

+ Port-Protocol VLAN ID: not supported

Local port: 8/23