Brocade Multi-Service IronWare Switching Configuration Guide (Supporting R05.6.00) - Manual (Page 903)

Multi-Service IronWare Switching Configuration Guide 873
53-1003036-02
Show commands
21
Brocade(config-mif-1/1,1/3,1/5)# mmrp include-vlan 300
Brocade(config-mif-1/1,1/3,1/5)# mmrp include-vlan 1000, 1100
Brocade(config-mif-1/1,1/3,1/5)# mmrp timer join 400 leave 1400 leave-all 10000
Brocade(config-mif-1/1,1/3,1/5)# mmrp point-to-point
Syntax: [no] mmrp point-to-point
By default, point-to-point is disabled.
Show commands
The following show commands are available for MMRP.
show mmrp
Brocade(DUT1) # show mmrp
----------------------------------------------------------------
Total configured mmrp ports : 4
Global Status : Enabled
Join-timer(in ms) : 400
Leave-timer(in ms) : 1400
Leaveall-timer(in ms) : 10000
Include-vlan : 100,200,300-500,666
-----------------------------------------------------------------
Port Vlan MMRP Enabled Mac-count p2p
-----------------------------------------------------------------
1/1 100 Yes 1 Yes
1/1 200 Yes 1 Yes
1/3 100 Yes 0 Yes
1/5 100 Yes 2 Yes
Syntax: show mmrp
show mmrp [ethernet slot/port]
Brocade(DUT1)# show mmrp ethe 1/1
------------------------------------------------------------------
MMRP Status : Enabled
Join-timer(in ms) : 500
Leave-timer(in ms) : 1600
Leaveall-timer(in ms): 10000
Include-vlan : 100,200,300-500,666
P2p : Yes
------------------------------------------------------------------
Port Vlan Mac-count
------------------------
1/1 100 3
1/1 200 1
Syntax: show mmrp [ethernet slot/port]
show mmrp [ethernet slot/port [vlan vlan id]]
Brocade(DUT1)#show mmrp ethe 1/1 vlan 100
-----------------------------------------------------------------
MMRP Status : Enabled
Join-timer(in ms) : 500
Leave-timer(in ms) : 1600
Leaveall-timer(in ms) : 10000
Include-vlan : 100,200,300-500,666
P2p : Yes