beautypg.com

Show rstp – Brocade Multi-Service IronWare Switching Configuration Guide (Supporting R05.6.00) User Manual

Page 498

background image

468

Multi-Service IronWare Switching Configuration Guide

53-1003036-02

show rstp

13

show rstp

Displays Rapid Spanning Tree Protocol (RSTP) information.

Syntax

show rstp [blocked] [vlan vlan-id]

Parameters

blocked

(Optional) Displays information in respect of ports blocked by the RSTP only.

vlan vlan-id

(Optional) Specifies the display of information for a specific VLAN.

Command

Modes

User EXEC mode
Privileged EXEC mode
Global configuration mode

Usage

Guidelines

Command

Output

The show rstp command displays the following information:

Output field

Description

VLAN ID

The port-based VLAN that owns the STP instance and the number of RSTP instances
on that VLAN. VLAN 1 is the default VLAN. If you have not configured port-based
VLANs on this device, all RSTP information is for VLAN 1.

Bridge IEEE RSTP Parameters

Bridge Identifier

The ID of the bridge.

Bridge Max Age

The configured max age for this bridge. The default is 20.

Bridge Hello

The configured hello time for this bridge.The default is 2.

Bridge FwdDly

The configured forward delay time for this bridge. The default is 15.

Force-Version

The configured force version value. One of the following value is displayed:

0 – The bridge has been forced to operate in an STP compatibility mode.

2 – The bridge has been forced to operate in an RSTP mode. (This is the default.)

txHoldCnt

The number of BPDUs that can be transmitted per Hello Interval. The default is 3.

Root Bridge Parameters:

Root Bridge Identifier

ID of the Root bridge that is associated with this bridge

Root Path Cost

The cost to reach the root bridge from this bridge. If the bridge is the root bridge, then
this parameter shows a value of zero.

Designated Bridge
Identifier

The bridge from where the root information was received.It can be from the root bridge
itself, but it could also be from another bridge.

Root Port

The port on which the root information was received. This is the port that is
connected to the Designated Bridge.