Brocade Multi-Service IronWare Switching Configuration Guide (Supporting R05.6.00) - Manual (Page 573)

Multi-Service IronWare Switching Configuration Guide 543
53-1003036-02
ERP support for PBB (Brocade MLX series and Brocade NetIron XMR)
15
port-type backbone-edge
enable
!
PBB interconection node (BCB)
FIGURE 150 PBB interconnection node (BCB)
BCB-1 Configuration for Major ring B-VLAN 100
!
esi bvlan encapsulation bvlan
vlan 100
tagged ethe 1/1 ethe 1/2
!
erp 100
left-interface esi bvlan vlan 100 ethe 1/1
right-interface esi bvlan vlan 100 ethe 1/2
raps-default-mac
rpl esi bvlan vlan 100 ethe 1/2
enable
!
interface ethernet 1/1
port-type backbone-network
enable
!
interface ethernet 1/2
port-type backbone-network
enable
ERP support for PBB
(Brocade MLX series and Brocade NetIron XMR)
As of NetIron R05.3.00 the Brocade MLX series and Brocade NetIron XMR platforms support PBB
using a local VPLS infrastructure.
To support ERP over a PBB network on the Brocade MLX series and Brocade NetIron XMR platforms
will make use of topology groups. The ERP protocol will be run on a regular L2 VLAN which will be
the master VLAN of the topology group and the VPLS VLANs which will carry the PB/PBB traffic will
be member VLANs of the topology group.
Configuration requirements
• Configure regular L2 VLANs for ERP operation