Brocade Multi-Service IronWare Switching Configuration Guide (Supporting R05.6.00) - Manual (Page 493)

Multi-Service IronWare Switching Configuration Guide 463
53-1003036-02
RSTP support for PB and PBB
13
AS-1 Configuration
NOTE
The AS-2 configuration is similar to the AS-1 configuration.
To carry PBB traffic, configure a VPLS instance. The B-VLAN used here is 100. For PB traffic, the
S-VLAN used is 200 and C-VLAN 300.
Tag type configuration
Brocade_AS-1(config)#tag-type 88e8 eth 1/1
Brocade_AS-1(config)#tag-type 88e8 eth 1/2
Brocade_AS-1(config)#tag-type 9100 eth 1/10
B-VLAN Configuration
Brocade_AS-1(config)#vlan 100
Brocade_AS-1(config-vlan-100)#tagged ethernet 1/1 ethernet 1/2
RSTP Configuration
Brocade_AS-1(config-vlan-100)#rstp
Brocade_AS-1(config)#router mpls
Brocade_AS-1(config-mpls)#vpls pbb-bvlan 1
Brocade_AS-1(config-mpls-vpls-pbb-bvlan)#pbb
Brocade_AS-1(config-mpls-vpls-pbb-bvlan-pbb)#vlan 100 isid 101010
Brocade_AS-1(config-mpls-vpls-pbb-bvlan-vlan-100-isid-101010)#tagged ethernet 1/1
ethernet 1/2
S-VLAN Configuration
Brocade_AS-1(config-mpls-vpls-pbb-bvlan)#vlan 200
Brocade_AS-1(config-mpls-vpls-pbb-bvlan-vlan-200)#tagged ethernet 1/10
CS-1 Configuration
NOTE
The configuration of CS-2 is similar to the configuration of CS-1, except for the RSTP priority
configuration.
Port type configuration
Brocade_CS-1(config)#tag-type 88e8 eth 1/1
Brocade_CS-1(config)#tag-type 88e8 eth 1/2
B-VLAN Configuration
Brocade_CS-1(config)#vlan 100
Brocade_CS-1(config-vlan-100)#tagged ethernet 1/1 ethernet 1/2
RSTP Configuration
Brocade_CS-1(config-vlan-100)#rstp
Brocade_CS-1(config-vlan-100)#rstp priority 100
ES-1 Configuration
NOTE
The configuration of ES-2 is similar to the configuration of ES-1.