Brocade Multi-Service IronWare Switching Configuration Guide (Supporting R05.6.00) - Manual (Page 883)

Multi-Service IronWare Switching Configuration Guide 853
53-1003036-02
Displaying IP information
19
Displaying martian addressing information
To display Martian Addressing information, use the following command.
Brocade# show ip martian
ip martian filtering on
0.0.0.0/8 deny
10.0.0.0/8 deny
127.0.0.0/8 deny
191.255.0.0/16 deny
192.0.0.0/24 deny
223.255.255.0/24 deny
240.0.0.0/4 deny
Syntax: show [vrf name] ip martian
You can use the vrf option to display martian addresses for a specific VRF.
Unicast Packets On a per port basis, this column shows the number of unicast packets that
have arrived from the tunnel and the number of packets that have been
transmitted to the tunnel. This count includes packets for both GRE tunnels
and packets for manually configured IPv6 tunnels.
Multicast Packets On a per port basis, this column shows the number of multicast packets that
have arrived from the tunnel and the packets that have been transmitted to the
tunnel. This count includes packets for both GRE tunnels and packets for
manually configured IPv6 tunnels.
TABLE 112 Show IP tunnel display information (Continued)
This field... Displays...