Brocade Multi-Service IronWare Switching Configuration Guide (Supporting R05.6.00) - Manual (Page 804)

774 Multi-Service IronWare Switching Configuration Guide
53-1003036-02
Zero Touch Provisioning
19
Syntax: ip dhcp-client vlan vlan number ve [ve number | tagged | untagged | slot / port |
auto-update disabled]
Enabling autoconfiguration on a default VLAN
To enable autoconfiguration on a default VLAN, use the following command when auto-update is
enabled on port 1/1.
Brocade(config)# ip dhcp-client default-vlan untagged 1/1 auto-update enabled
Enabling autoconfiguration on a tagged VLAN
To enable autoconfiguration on a tagged VLAN, use the following command when the VLAN number
is 227, the VE number is 227, and auto-update is enabled on port 1/1.
Brocade(config)# ip dhcp-client vlan 227 ve 227 tagged 1/1 auto-update enabled
Enabling autoconfiguration on an untagged VLAN
To enable autoconfiguration on an untagged VLAN, use the following command when the VLAN
number is 227, the VE number is 227, and auto-update is enabled on port 1/1.
Brocade(config)# ip dhcp-client vlan 227 ve 227 untagged 1/1 auto-update enabled
Enabling autoconfiguration on a management port
To enable autoconfiguration on a management port, use the following command.
Brocade(config)# ip dhcp-client vlan
Use the no ip dhcp-client vlan command to disable the DHCP client and autoconfiguration for the
designated port.
Displaying Zero Touch Provisioning information
Run the show ip and the show ip interface commands to display information about the successful
implementation of Zero Touch Provisioning.
Brocade#show ip
Global Settings
IP CAM Mode: static IPVPN CAM Mode: static
ttl: 64, arp-age: 10, bootp-relay-max-hops: 4, icmp-error-rate: 400
IP Router-Id: 10.1.1.1
DHCP server address: 10.21.96.1
TFTP server address: 10.21.96.1
Configuration filename: brocade.cfg
enabled: UDP-Broadcast-Forwarding ICMP-Redirect Source-Route Load-Sharing
RARP
disabled: Directed-Broadcast-Forwarding drop-arp-pending-packets IRDP
Proxy-ARP RPF-Check RPF-Exclude-Default RIP BGP4 IS-IS OSPF VRRP
VRRP-Extended VSRP
Configured Static Routes: 2