Brocade Multi-Service IronWare Switching Configuration Guide (Supporting R05.6.00) - Manual (Page 869)

Multi-Service IronWare Switching Configuration Guide 839
53-1003036-02
Displaying IP information
19
Displaying the static ARP table
To display the static ARP table, enter the following command at any CLI level.
This example shows four static entries, one of which is multi-port. Multi-port static ARP entries are
supported only on the Brocade NetIron XMR and Brocade MLX series devices. Note that for
multi-port entries the Port column shows a single port number followed by an ellipsis; the full list of
ports associated with that ARP entry is displayed on the following line.
Syntax: show ip static-arp [ethernet slot/portnum | mac-address xxxx.xxxx.xxxx [mask] | ip-addr
[ip-mask]] [num] [| begin expression | exclude expression | include expression ]
For information on the command syntax, see the syntax of the show arp command under
“Displaying the ARP cache” .
Displaying the forwarding cache
To display the IP Forwarding Cache for directly connected hosts, enter the following command.
Syntax: show ip cache [ip-addr] [| begin expression | exclude expression | include expression ]
The ip-addr parameter displays the cache entry for the specified IP address.
TABLE 105 CLI display of static ARP table
This field... Displays...
Index The number of this entry in the table.
IP Address The IP address of the device.
MAC Address The MAC address of the device.
Port The port attached to the device the entry is for. In the case of a multi-port static
ARP, this will display a single port followed by an ellipsis, and the full list of
ports will be displayed on the line below.
VLAN VLAN associated with this entry, if any.
ESI Ethernet Service Instance (ESI) associated with this entry, if any.
Brocade# show ip static-arp
Total no. of entries: 4
Index IP Address MAC Address Port VLAN ESI
1 10.1.1.1 0001.0001.0001 1/1
2 10.6.6.2 0002.0002.0002 1/2
3 10.6.6.7 1111.1111.1111 2/1...
Ports : ethe 2/1 to 2/7 ethe 3/1 to 3/2
4 10.7.7.7 0100.5e42.7f40 3/3
Brocade> show ip cache
Cache Entry Usage on LPs:
Module Host Network Free Total
15 6 6 204788 204800