Brocade Multi-Service IronWare Switching Configuration Guide (Supporting R05.6.00) - Manual (Page 412)

382 Multi-Service IronWare Switching Configuration Guide
53-1003036-02
MSTP support for PBB
12
Show commands
The output of the following commands include the information about the configured Layer 2 VLANs,
VPLS VLANs (Brocade MLX series and Brocade NetIron XMR) or ESI VLANs (Brocade NetIron CER
and Brocade NetIron CES) within MSTP.
Show MSTP config
The show mstp config command displays the MSTP configuration as it appears in the running
config.
For Brocade MLX series and Brocade NetIron XMR
Brocade_DUT# show mstp config
Mstp-region 1
Mstp-region name PBB-Domain
Mstp-region revision 1
Mstp-region instance 1 vpls 1 vlan 100
Mstp-region start
Mstp-region 2
Mstp-region name PB-Domain1
Mstp-region revision 1
Mstp-region instance 1 vpls 1 vlan 200
Mstp-region start
Syntax: show mstp config
For Brocade NetIron CER and Brocade NetIron CES
Brocade_DUT# show mstp config
Mstp-region 1
Mstp-region name PBB-Domain
Mstp-region revision 1
Mstp-region instance 1 esi pbb-bvlan vlan 100
Mstp-region start
Mstp-region 2
Mstp-region name PB-Domain1
Mstp-region revision 1
Mstp-region instance 1 esi pb-svlan vlan 200
Mstp-region start
Syntax: show mstp config