Brocade Multi-Service IronWare Switching Configuration Guide (Supporting R05.6.00) - Manual (Page 480)

450 Multi-Service IronWare Switching Configuration Guide
53-1003036-02
RSTP support for PB and PBB
13
RSTP Configuration on vpls instance 1
Brocade_AS-1(config-mpls-vpls-pb-svlan)#rstp
Brocade_AS-1(config-mpls-vpls-pb-svlan)#rstp priority 100
Configuring AS-2
Tag type configuration
Configure the port tag type for S-VLAN to 0x9100.
Brocade_AS-2(config)#tag-type 9100 eth 1/1
Brocade_AS-2(config)#tag-type 9100 eth 1/3
S-VLAN Configuration
Configure VPLS VLANs which will carry the PB traffic, the S-VLAN here is 200.
Brocade_AS-2(config)#router mpls
Brocade_AS-2(config-mpls)#vpls pb-svlan 1
Brocade_AS-2(config-mpls-vpls-pb-svlan)#pbb
Brocade_AS-2(config-mpls-vpls-pb-svlan-pbb)#vlan 200
Brocade_AS-2(config-mpls-vpls-pb-svlan-vlan-200)#tag ethernet 1/1 ethernet 1/3
RSTP Configuration on vpls instance 1
Brocade_AS-2 (config-mpls-vpls-pb-svlan)#rstp
Configuring ES-1
Tag type configuration
Configure the port tag type for S-VLAN to 0x9100.
Brocade_ES-1(config)#tag-type 9100 eth 1/2
Brocade_ES-1(config)#tag-type 9100 eth 1/3
S-VLAN Configuration
Configure VPLS VLANs which will carry the PB traffic, the S-VLAN here is 200.
Brocade_ES-1(config)#router mpls
Brocade_ES-1(config-mpls)#vpls pb-vlan 1
Brocade_ES-1(config-mpls-vpls-pb-vlan)#pbb
Brocade_ES-1(config-mpls-vpls-pb-vlan-pbb)#vlan 200
Brocade_ES-1(config-mpls-vpls-pb-vlan-vlan-200)#tag ethernet 1/2 ethernet 1/3
C-VLAN Configuration
Configure C-VLAN 300 on the customer port.
Brocade_ES-1(config-mpls-vpls-pb-vlan)#vlan 300
Brocade_ES-1(config-mpls-vpls-pb-vlan-vlan-300)#tag eth 1/1 eth 1/4
RSTP Configuration on VPLS instance
Brocade_ES-1(config-mpls-vpls-pb-vlan)#rstp
Configuring CE-1
C-VLAN Configuration
Configure a regular Layer 2 VLAN with 300 and add port 1/1 to it.
Brocade_CE-1(config)#vlan 300
Brocade_CE-1(config-vlan-300)#tagged ethernet 1/1