Brocade Multi-Service IronWare Switching Configuration Guide (Supporting R05.6.00) - Manual (Page 325)

Multi-Service IronWare Switching Configuration Guide 295
53-1003036-02
Configuring PBB
11
Show Commands
The following section discusses available show commands.
Show mpls vpls detail
The show mpls vpls detail command displays information about the operation state of the VPLS
instance in regard to the local endpoints.
Brocade(XMR12)#show mpls vpls detail
VPLS 1, Id 1, Max mac entries: 8192
PBB
Total vlans: 2, Tagged ports: 2 (2 Up), Untagged ports 0 (0 Up)
IFL-ID: 4096
Vlan 300
Tagged: ethe 1/5
Vlan 3000 isid 40000
Tagged: ethe 4/1
CPU-Protection: ON, MVID: 0x001, VPLS FID: 0x0000a00c
Local Switching: Enabled
Extended Counter: ON
Show mac
The show mac command displays the MACs learned by Layer 2.
Brocade(XMR12)#show mac
Total active entries from all ports = 1
Type Code - ST:Static SEC:Secure 1x:Dot1x NA: NotAvail A:Allow D:Deny IB:
Installed B-MAC
CCL: Cluster Client Local CCR:Cluster Client Remote CL:Local CR:Remote
MAC Address Port Age VLAN Type
0012.f2f7.3b00 4/19 0 10 IB
Syntax: show mac
Show mac vpls
The show mac vpls command displays the MACs learnt under all VPLS instances.
Brocade(XMR12)#show mac vpls
Total VPLS mac entries in the table: 2 (Local: 2, Remote: 0)
VPLS MAC Address L/R/IB Port Vlan(In-Tag)/Peer ISID Age
==== =========== ====== ==== ================= ==== ===
1 0000.0404.0000 IB 1/2 300 30000 0
1 0000.0403.0000 L 1/1 200 NA 0
Show mac vpls X HHHH.HHHH.HHHH
To view the detail of the B-MAC info, you must enter the command show mac vpls x
hhhh.hhhh.hhhh, wherehhhh.hhhh.hhhh is the C-MAC that has a B-MAC association.
Brocade(XMR12)#show mac vpls 1 0000.0404.0000
VPLS: 1 MAC: 0000.0404.0000 Age: 0
Local MAC Port: 1/2 VLAN: 300 ISID: 30000
Associated B-MAC: 0000.B000.0201
Trunk slot mask: 0x00000000
Syntax: show mac vpls x hhhh.hhhh.hhhh