beautypg.com

Clearing the np statistics counters – Brocade Multi-Service IronWare Switching Configuration Guide (Supporting R05.6.00) User Manual

Page 67

background image

Multi-Service IronWare Switching Configuration Guide

37

53-1003036-02

Displaying Network Processor statistics

1

Clearing the NP statistics counters

You can clear the NP statistics counters for an entire device or selectively by port or slot using the
clear np statistics command as shown in the following.

Brocade# clear np statistics

Syntax: clear np statistics [ethernet ] [slot ]

You can use the ethernet option and specify a variable to clear NP statistics for an
individual port.

You can use the slot option and specify a variable to clear NP statistics for an individual
interface module.

TABLE 11

Relationships between TX counters

Tx Raw Good Packets

=
=

Tx Receive From TM Packets - Tx Bad Packets
Tx Unicast Packets + Tx Broadcast Packets + Tx Multicast Packets + Tx Source Port
Suppression Drop

Tx Sent to MAC

=
=

Tx IPv4 Packets + Tx IPv6 Packets + Tx Others
Tx Raw Good Packets – Tx Source Port Suppression Drop – Tx ACL drop - Tx RL Drop
– Tx Multicast TTL drop