Brocade Multi-Service IronWare Switching Configuration Guide (Supporting R05.6.00) - Manual (Page 327)

Multi-Service IronWare Switching Configuration Guide 297
53-1003036-02
Configuring PBB
11
NHT IP Index MAC Address VLAN Out I/F Out Port TNL CNT XC CNT LABEL EXP/PCP
10.20.20.1 0 000c.dbf5.c773 1 1/20 1/20 0 1
N.A. 1 000c.dbf4.0000 50 N.A. N.A. 0 3 0
N.A. 2 000c.dbf5.0000 50 N.A. N.A. 0 2 0
N.A. 3 000c.dbf6.0000 60 N.A. N.A. 0 1 5
Syntax: show nht
Show nht vlan vlan_id
The show nht vlan command allows the nht entry to be displayed based with those that have the
matching VLAN ID.
Brocade(XMR12)#show nht vlan 50
Reconcile Done -
ARP = 0, GRE = 0, MPLS = 0, phase_1 = 0, l2vpn = 0, phase_2 = 0
NHT IP Index MAC Address VLAN Out I/F Out Port TNL CNT XC CNT LABEL EXP/PCP
N.A. 1 000c.dbf4.0000 50 N.A. N.A. 0 3 0
N.A. 2 000c.dbf5.0000 50 N.A. N.A. 0 2 0
Syntax: show nht vlan vlan_id
Show nht mac-based [vlan vlan id]
The show nht mac-based command displays the MAC-based NHT entries as well as optionally
filtered to a specified VLAN ID.
Brocade(XMR12)#show nht mac-based
Reconcile Done -
ARP = 0, GRE = 0, MPLS = 0, phase_1 = 0, l2vpn = 0, phase_2 = 0
NHT IP Index MAC Address VLAN Out I/F Out Port TNL CNT XC CNT LABEL EXP/PCP
N.A. 1 000c.dbf4.0000 50 N.A. N.A. 0 3 0
N.A. 2 000c.dbf5.0000 50 N.A. N.A. 0 2 0
N.A. 3 000c.dbf6.0000 60 N.A. N.A. 0 1 5
Brocade(XMR12)#show nht mac-based vlan 60
Reconcile Done -
ARP = 0, GRE = 0, MPLS = 0, phase_1 = 0, l2vpn = 0, phase_2 = 0
NHT IP Index MAC Address VLAN Out I/F Out Port TNL CNT XC CNT LABEL EXP/PCP
N.A. 3 000c.dbf6.0000 60 N.A. N.A. 0 1 5
Syntax: show nht mac-based [vlan vlan id]
Show cam ifl-isid slot/port output changes
The output of the show cam ifl-isid command displays the Service-Type programmed in the service
PRAM.
Brocade(XMR12)#show cam ifl-isid 1/2
Slot Index Port Outer VLAN Itag ISID PRAM IFL ID IPV4/V6 Service
(Hex) (Hex) Routing Type
1 00c1ffb 1/2 300 2000 181ffb 4097 0/0 5
1 00c1ffc 1/1 300 2000 181ffc 4097 0/0 5
Syntax: show cam ifl-isid slot/port