Displaying mct pim count – Brocade Multi-Service IronWare Switching Configuration Guide (Supporting R05.6.00) User Manual

Page 725

Multi-Service IronWare Switching Configuration Guide

695

53-1003036-02

PIM Over MCT

MJ - Membership Join, MI - Membership Include, ME - Membership

Exclude

BR - Blocked RPT, BA - Blocked Assert, BF - Blocked Filter, BI -

Blocked IIF,

BM - Blocked MCT

Total entries in mcache: 1

1 (2062:62:62:62::11, ff1a::2) in v62 (tag e1/1), Uptime 00:00:58

(SM) upstream neighbor is L2 fe80::21b:edff:fea4:a441. RP

2001:1:2:3:4::b Flags (0x304680c1) SM SPT LSRC LRCV HW FAST fast

ports: AgeSltMsk: 00000003, FID: 0xffff (D), DIT: NotReq, profile: none,

KAT Timer value: 240 Forwarding_oif: 0, Immediate_oif: 0, Blocked_oif:

1 Blocked OIF 1:

TR(e1/39,e1/39)(VL62), 00:00:01/0, Flags: MJ BM

Number of matching entries: 1

MLX#

Refer to “Displaying the IPv6 PIM multicast cache” for output descriptions.

Displaying MCT PIM Count

To display the statistics and error counters for the Multicast MDUP channel between the MCT
peers, use the show ip pim count mct command.

Brocade#show ip pim count mct

Multicast MCT Statistics for IPv4 (UP):

Messages assembled into the send buffer : 11811

Messages processed out of the recv buffer: 0

Segments sent successfully to TCP : 11762

Segments failed to be accepted by TCP : 0

Segments assembled into the receive buffer : 0

Messages dropped because (size > 1500) : 0

Messages dropped because it won't fit into available space in send buffer : 0

Segments dropped because it won't fit into available space in receive buffer: 0

Received messages dropped because of cluster-id mismatch : 0

Received messages dropped because the peer was not recognized : 0

Received messages dropped because cluster not active : 0

Received messages dropped because MCT VLAN unrecognized : 0

Received messages dropped because of bad message type : 0

Received messages dropped because of bad checksum : 0

Received bytes skipped because of sync or checksum errors : 0

Brocade#

Syntax: show ip pim count mct

To display the MCT IPv6 PIM count, use the show ipv6 pim count mct command.

Brocade#show ipv6 pim count mct

Multicast MCT Statistics for IPv6 (UP):

Messages assembled into the send buffer : 279

Messages processed out of the recv buffer: 523

Segments sent successfully to TCP : 279