Grass Valley EDIUS Neo 3 User Manual
Page 92
90
EDIUS NEO — User Reference Guide
Section 2 — Settings and Configuration
•
In the Record Position field enter the position adjustment, in number of
steps, when beginning to record. Zero (0) = no adjustment.
•
Select the audio channels to be monitored.
•
Select the desired Setup (black reference) level.
Note
On SD devices, 0 IRE is commonly used in Japan for the Setup Level and 7.5
IRE is commonly used in North America.
•
Select the Use cueup command if DV deck supports it option if the DV
deck supports the cueup feature.
15.
Click the
OK
button to close the output device settings dialog.
16.
Click the
Next
button in the Output H/W Format Settings dialog.
The summary information screen depicted in
appears.
Figure 85. Device Preset Summary Information
This screen summarizes the input and output settings for the device.
17.
Click the
Back
button if you wish to go back and change any of the
device input and output settings.