Grass Valley EDIUS Neo 3 - Manual (Page 699)

EDIUS NEO — User Reference Guide 697
Resetting the Pan Rubber Band
Figure 855. Volume Entry Dialog
Figure 856. Pan Entry Dialog
5. Enter the desired value or timecode (applicable to Move selection only).
6. Click the OK button to close the dialog.
Resetting the Pan Rubber Band
To reset the Pan rubber band to a balanced left/right audio state, do the fol-
lowing:
1. Expand the audio panel if necessary.
2. Click the Volume/Pan button to switch to Pan mode.
3. Right-click the Pan rubber band.
4. Select Center from the menu.
The Pan rubber band is returned to the center position on the audio wave-
form.
Deleting or Initializing Rubber Band Points
Rubber band points can be individually deleted or the rubber bands may
be initialized (reset to their default state).