Creating a sequence (conjoining multiple clips), For mor – Grass Valley EDIUS Neo 3 User Manual
Page 241
EDIUS NEO — User Reference Guide
239
Creating Clips
Creating a Sequence (Conjoining Multiple Clips)
In order to create a sequence from multiple still or video clips, the following
conditions apply:
•
The clip type, image size and aspect ratio of all clips must be the same.
•
For video clips, the field order and frame rate of all clips must be the
same.
To create a sequence from multiple clips in the Asset Bin, follow these steps:
Note
For information on importing stills as a sequence, see Importing Still
Sequences
1.
Select multiple clips in the Asset Bin (hold down the [
CTRL
] key while
selecting clips and right-click on a selected clip.
2.
Select Set as Sequence from the menu. See
for an example.
Note
If the image size, aspect ratio, field order, frame rate, etc. of all selected clips
is not the same as explained above, the Set as Sequence option will be greyed
out and cannot be selected.
Figure 239. Asset Bin - Set as Sequence
A new sequence clip is created and saved in the Asset Bin as shown in
Note
The clip type icon in the lower left corner of the thumbnail identifies the clip
as a sequence clip.