Grass Valley EDIUS Neo 3 - Manual (Page 572)

570 EDIUS NEO — User Reference Guide
Section 6 — Effects and Titles
Figure 664. Dragging Center Track Point
In Figure 665 , the [ CTRL] key is held down while dragging the upper center
track point away from the anchor point. This enlarges (scales up) the
selected object, but, all sides do not move equally in relation to the anchor
point.
Figure 665. CTRL Dragging Center Track Point
With the [ CTRL] key held down, the side opposite the track point being
dragged - in this case, the bottom side - does not move in relation to the
anchor point. The other three sides (top, right and left) move away from the
anchor point while the bottom side retains its position relative to the anchor
point. Of course, this would also be true if the object were scaled down as
well; the difference being that the top, left and right sides would move
towards the anchor point while the bottom side retains its position.