Grass Valley EDIUS Neo 3 - Manual (Page 115)

EDIUS NEO — User Reference Guide 113
User Application Settings
Figure 103. Ripple Mode On/Sync Mode On/Insert Mode Enabled
Note Ripple Mode may be toggled on/off from the Timeline.
Insert Mode
With insert mode enabled, adding a new clip moves any existing clips at
the insertion point forward in time to accommodate the new clip. The
length of the sequence is increased by the length of the inserted clip (see
Figure 104 ). Default = Selected.
Figure 104. Insert Mode Example
Overwrite Mode
With overwrite mode enabled, adding a new clip overwrites the existing
clip at the insertion point by the amount of overlap between the two clips.
The length of the sequence does not increase (see
Figure 105 ). Default = Not
Selected.
Figure 105. Overwrite Mode Example