Additional rubberband adjustments – Grass Valley EDIUS Neo 3 User Manual
Page 696
694
EDIUS NEO — User Reference Guide
Section 7 — Audio Operations
An adjustment point is added to the rubber band.
Note
An alternative method for adding an adjustment point is to right-click on the
rubber band and select Add/Delete from the menu.
4.
Drag the point vertically or horizontally to adjust the shape of the
rubber band.
Note
Regardless of the display mode - linear (%) or logarithmic (dB) - of the audio
rubber bands, node to node adjustments are always linear.
•
When VOL is selected, drag the point upwards to increase the
volume and downward to decrease the volume.
•
When PAN is selected, drag the point upward to increase the sound
in the left speaker, drag the point downward to increase the sound
in the right speaker. See
for an example.
Figure 852. Pan Point Adjusted for Left Speaker
Additional Rubberband Adjustments
•
Dragging the point horizontally changes the position of the point on the
Timeline at which the adjustment takes place.
•
Dragging the point while pressing the [
SHIFT
] key adjusts the entire
rubber band from the adjustment point to the end of the clip or to the
next adjustment point. See